|
| Browse Catalog [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] ... |
|
|
1/2 Dia. Square Corner w/ Weldon Shank Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
|
1/2 Dia. Stub Length Square Corner Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
1/2 Dia., .030 Corner Rad, Standard Length 3 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
|
1/2 Dia., Relieved Neck Square Corner Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
1/2 Dia., Square Corner Standard Length 3 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
|
1/2 Dia., Stub Flute, Square Corner w/ Neck Relief
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
YG SOLID CARBIDE DREAM DRILL TiAlN COATED
|
|
1/4 DREAM DRILL - COOLANT THRU
YG SOLID CARBIDE DREAM DRILL TiAlN COATED
|
1/8 Dia., Square Corner Stub Length 5 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 5 flute geometry reduces harmonics.
|
|
11/64 COBALT JOBBER GOLD-P 10 PK.
11/64 COBALT JOBBER LENGTH GOLD-P DRILL
|
11/64 JOBBER LENGTH GOLD-P DRILL
|
|
3 mm Dia., Relieved Neck 2 Flute Ball End Stub
|
3/4 Dia. 2 Flute w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
|
3/4 Dia. 2 Flute w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
3/4 Dia. 2 Flute X-tra Long w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
|
3/4 Dia., 4 Flute, Square Corner Stub Length Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
3/8 Dia. 2 Flute Long Length Streaker End Mill with Weldon Shank
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
|
3/8 Dia. 2 Flute Stub Length Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
3/8 Dia. Square Corner Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
|
3mm Dia. Tapered Neck 2 Flute Ball End
|
3mm Dia. Tapered Neck 4 Flute Ball End (2 Flute Pictured)
|
|
5/16 Dia.2 Flute Carbide Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
5/16 Dia., .030 Relieved Neck Corner Radius Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
|
5/16 Dia., Stub Flute, .030 Corner Rad, w/ Neck Relief
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
|
|
5/32 Dia. 4 Flute Ball End Standard Length AlTin Coated End Mill
|
5/32 Dia. 4 Flute Square Corner Standard Length AlTin Coated End Mill
|
|
5/8 Dia. 2 Flute Extra Long Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
5/8 Dia. 2 Flute Streaker Ball End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines.
|
|
5/8 Dia., .030 Corner Rad, Relieved Standard 5 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 5 flute geometry reduces harmonics.
|
6mm Dia. 4 Flute Square Corner Standard Length AlTin Coated End Mill
|
|
7/16 Dia. 4 Flute Ball End Standard Length Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
7/16 Dia. 4 Flute Square Corner Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
|
7/16 Dia., .020 Corner Radius Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
1/2 Dia. Corner Radius w/ Weldon Shank Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
|
1/2 Dia. Stub Length .030 Corner Radius Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
1/2 Dia., .030 Corner Rad, Standard Length 3 Flute End Mill w/ Weldon Shank
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
|
1/2 Dia., Relieved Neck Square Corner w/ Weldon Shank Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
1/2 Dia., Square Corner Standard Length 3 Flute End Mill w/ Weldon Shank
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
|
1/2 Dia., Stub Flute, Square Corner w/ Neck Relief and Weldon Shank
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
11/64 Dia. 4 Flute Square Corner Standard Length AlTin Coated End Mill
|
|
3/16 COBALT JOBBER GOLD-P 10 PK.
3/16 COBALT JOBBER LENGTH GOLD-P DRILL
|
3/16 Dia. 4 Flute Ball End Standard Length AlTin Coated End Mill
|
|
3/16 Dia., Square Corner Stub Length 5 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 5 flute geometry reduces harmonics.
|
3/16 JOBBER LENGTH GOLD-P DRILL
|
|
3/4 Dia. 3 Flute w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
3/4 Dia. 3 Flute w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
|
3/4 Dia. 3 Flute X-tra Long w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
3/4 Dia., 4 Flute, .030 Corner Radius Stub Length Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
|
 |
|
| Ecommerce powered by MonsterCommerce shopping cart. |