|
| Browse Catalog [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] ... |
|
O COBALT JOBBER LENGTH GOLD-P DRILL
|
O JOBBER LENGTH GOLD-P DRILL
|
|
P COBALT JOBBER LENGTH GOLD-P DRILL
|
P JOBBER LENGTH GOLD-P DRILL
|
|
Q COBALT JOBBER LENGTH GOLD-P DRILL
|
Q JOBBER LENGTH GOLD-P DRILL
|
|
R COBALT JOBBER LENGTH GOLD-P DRILL
|
R JOBBER LENGTH GOLD-P DRILL
|
|
S COBALT JOBBER LENGTH GOLD-P DRILL
|
S JOBBER LENGTH GOLD-P DRILL
|
|
T COBALT JOBBER LENGTH GOLD-P DRILL
|
T JOBBER LENGTH GOLD-P DRILL
|
|
U COBALT JOBBER LENGTH GOLD-P DRILL
|
U JOBBER LENGTH GOLD-P DRILL
|
|
V COBALT JOBBER LENGTH GOLD-P DRILL
|
V JOBBER LENGTH GOLD-P DRILL
|
|
W COBALT JOBBER LENGTH GOLD-P DRILL
|
W JOBBER LENGTH GOLD-P DRILL
|
|
X COBALT JOBBER LENGTH GOLD-P DRILL
|
X JOBBER LENGTH GOLD-P DRILL
|
|
Y COBALT JOBBER LENGTH GOLD-P DRILL
|
Y JOBBER LENGTH GOLD-P DRILL
|
|
Z COBALT JOBBER LENGTH GOLD-P DRILL
|
Z JOBBER LENGTH GOLD-P DRILL
|
|
|
1.5mm Dia. 4 Flute Square Corner Standard Length AlTin Coated End Mill
|
|
1/16 COBALT JOBBER GOLD-P 10 PK.
1/16 COBALT JOBBER LENGTH GOLD-P DRILL
|
1/16-27 Carbide Thread Mill NPT
|
|
1/16-27 Carbide Thread Mill NPTF
|
1/2 Dia. 2 Flute Relieved Neck Deep Milling Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
|
1/2 Dia. 3 Flute Deep Milling Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
1/32 Dia. 4 Flute Ball End Standard Length AlTin Coated End Mill
|
|
1/32 Dia. 4 Flute Square Corner Standard Length AlTin Coated End Mill
|
1/4 Dia. .020 Corner Rad, Relieved Standard 5 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 5 flute geometry reduces harmonics.
|
|
1/4 Dia. 2 Flute Long Length Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
1/4 Dia. 2 Flute Streaker Ball End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines.
|
|
1/4 Dia. 2 Flute w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
1/4 Dia. 2 Flute w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
|
1/4 Dia. 2 Flute X-tra Long w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
1/4 Dia. 4 Flute .020 Corner Rad Stub Flute Long Reach Pow-R-Feed
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
|
1/4 Dia. 4 Flute Square Corner Stub Length Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
1/4 Dia. Ext. Reach Tapered Neck 4 Flute Ball End
|
|
1/4 Dia. Extended Reach Tapered Neck 2 Flute Ball End
|
1/4 Dia. Long Length Corner Radius Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
|
1/4 Dia. Square Corner w/ Weldon Shank Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
1/8 Dia, .015 Corner Rad, Stub Length 5 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 5 flute geometry reduces harmonics.
|
|
1/8 Dia. 2 Flute Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
1/8 Dia. 2 Flute Stub Length Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
|
1/8 Dia. 4 Flute .015 Corner Rad Stub Flute Long Reach Pow-R-Feed
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
1/8 Dia. 4 Flute .015 Corner Rad Stub Flute Long Reach Pow-R-Feed
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
|
 |
|
| E-commerce powered by MonsterCommerce shopping carts. |