|
| Browse Catalog [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] ... |
|
3/8 Dia.3 Flute X-tra Long w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
3/8-18 Carbide Thread Mill NPT
|
|
3/8-18 Carbide Thread Mill NPTF
|
3mm Dia. 4 Flute Square Corner Standard Length AlTin Coated End Mill
|
|
5/16 Dia. 2 Flute Streaker Ball End Mill w/ Weldon Shank
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines.
|
5/16 Dia. Corner Radius w/ Weldon Shank Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
|
5/16 Dia. Long Length Square Corner Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
5/16 Dia., .030 Corner Rad, Relieved Standard 5 Flute End Mill w/ Weldon Shank
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 5 flute geometry reduces harmonics.
|
|
5/64 Dia. 4 Flute Ball End Standard Length AlTin Coated End Mill
|
5/64 Dia. 4 Flute Square Corner Standard Length AlTin Coated End Mill
|
|
5/8 Dia. 3 Flute Deep Milling Streaker End Mill w/ Weldon Shank
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
5/8 Dia. 4 Flute .030 Corner Rad Stub Flute Long Reach Pow-R-Feed
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
|
6mm Dia. Ext. Reach Tapered Neck 4 Flute Ball End
|
6mm Dia. Extended Reach Tapered Neck 2 Flute Ball End
|
|
7/32 Dia. 4 Flute Ball End Standard Length Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
7/32 Dia. 4 Flute Square Corner Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
|
7/32 Dia., .020 Corner Radius Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
ON SALE AT RITCHIE INDUSTRIAL
|
|
|
1/2 Dia, .030 Corner Rad, Stub Length 5 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 5 flute geometry reduces harmonics.
|
|
1/2 Dia. 2 Flute Extra Long Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
1/2 Dia. 2 Flute w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
|
1/2 Dia. 2 Flute w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
1/2 Dia. 2 Flute X-tra Long w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
|
1/2 Dia. 4 Flute .030 Corner Rad Stub Flute Long Reach Pow-R-Feed
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
1/2 Dia. 4 Flute .030 Corner Rad Stub Flute Long Reach Pow-R-Feed
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
|
1/2 Dia., .030 Corner Rad, Stub Length 3 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
1/2 Dia., 4 Flute, Square Corner Stub Length Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
|
1/2 Dia., Standard Length High Helix 3 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
1/2-14 Carbide Thread Mill NPT
|
|
1/2-14 Carbide Thread Mill NPTF
|
1/4 Dia. 2 Flute Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
|
1/4 Dia. 2 Flute Stub Length Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
1/4 Dia. 4 Flute Ball End Standard Length Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
|
1/4 Dia. 4 Flute Square Corner Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
1/4 Dia. Square Corner 5 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 5 flute geometry reduces harmonics.
|
|
1/4 Dia. Square Corner Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
1/4 Dia. Stub Length Square Corner Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
|
1/4 Dia., .020 Corner Radius Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
1/4 Dia., .030 Relieved Neck Corner Radius Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
|
1/4 Dia., Stub Flute, .030 Corner Rad, w/ Neck Relief
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
|
|
3.5mm Dia. 4 Flute Square Corner Standard Length AlTin Coated End Mill
|
YG SOLID CARBIDE DREAM DRILL TiAlN COATED
|
|
3/16 DREAM DRILL - COOLANT THRU
YG SOLID CARBIDE DREAM DRILL TiAlN COATED
|
3/32 Dia. 4 Flute Ball End Standard Length AlTin Coated End Mill
|
|
3/32 Dia. 4 Flute Square Corner Standard Length AlTin Coated End Mill
|
3/4 Dia. 3 Flute Deep Milling Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
|
3/4 Dia. 4 Flute .030 Corner Rad Stub Flute Long Reach Pow-R-Feed
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
3/8 Dia. 2 Flute Streaker Ball End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines.
|
|
 |
|
| Shopping cart powered by MonsterCommerce e-commerce software. |