|
| Browse Catalog [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] ... |
|
5/16 Dia., .030 Corner Rad, Standard Length 3 Flute End Mill w/Weldon Shank
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
5/16 Dia., Relieved Neck Square Corner w/ Weldon Shank Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
|
5/16 Dia., Square Corner Standard Length 3 Flute End Mill w/ Weldon Shank
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
5/16 Dia., Stub Flute, Square Corner w/ Neck Relief and Weldon Shank
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
|
5/8 Dia, .030 Corner Rad, Stub Length 5 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 5 flute geometry reduces harmonics.
|
5/8 Dia. 4 Flute .030 Corner Rad Stub Flute Long Reach Pow-R-Feed
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
|
5/8 Dia. 4 Flute .030 Corner Rad Stub Flute Long Reach Pow-R-Feed
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
5/8 Dia., .030 Corner Rad, Stub Length 3 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
|
5/8 Dia., Standard Length High Helix 3 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
7/64 Dia. 4 Flute Ball End Standard Length AlTin Coated End Mill
|
|
7/64 Dia. 4 Flute Square Corner Standard Length AlTin Coated End Mill
|
|
|
1.0 Dia. 3 Flute Deep Milling Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
1/2 Dia. Tapered Neck 2 Flute Ball End
|
|
1/2 Dia. 2 Flute Extra Long Streaker End Mill w/ Weldon Shank
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
1/2 Dia. 2 Flute Streaker Ball End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines.
|
|
1/2 Dia. Long Length Corner Radius Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
1/2 Dia. Tapered Neck 4 Flute Ball End (2 Flute Pictured)
|
|
1/2 Dia., .030 Corner Rad, Relieved Standard 5 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 5 flute geometry reduces harmonics.
|
1/2 Dia., Relieved Neck 2 Flute Ball End Stub
|
|
1/4 Dia. , .020 Corner Rad 5 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 5 flute geometry reduces harmonics.
|
1/4 Dia. 2 Flute Streaker End Mill with Weldon Shank
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
|
|
1/8 Dia. 4 Flute Ball End Standard Length AlTin Coated End Mill
|
|
1/8 Dia. 4 Flute Square Corner Standard Length AlTin Coated End Mill
|
1-11 1/2 Carbide Thread Mill NPT
|
|
1-11 1/2 Carbide Thread Mill NPTF
|
12mm Dia. Ext. Reach Tapered Neck 4 Flute Ball End
|
|
12mm Dia. Extended Reach Tapered Neck 2 Flute Ball End
|
3/4 Dia, .030 Corner Rad, Stub Length 5 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 5 flute geometry reduces harmonics.
|
|
3/4 Dia. 4 Flute .030 Corner Rad Stub Flute Long Reach Pow-R-Feed
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
3/4 Dia. 4 Flute .030 Corner Rad Stub Flute Long Reach Pow-R-Feed
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
|
3/4 Dia., .030 Corner Rad, Stub Length 3 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
3/4 Dia., Standard Length High Helix 3 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
|
3/8 Dia. 2 Flute Long Length Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
3/8 Dia. 4 Flute Ball End Standard Length Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
|
3/8 Dia. 4 Flute Square Corner Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
3/8 Dia. Stub Length Square Corner Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
|
3/8 Dia., .020 Corner Radius Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
3/8 Dia., .030 Corner Rad, Standard Length 3 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
|
3/8 Dia., Relieved Neck Square Corner Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
3/8 Dia., Square Corner Standard Length 3 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
|
3/8 Dia., Stub Flute, Square Corner w/ Neck Relief
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
4.5mm Dia. 4 Flute Square Corner Standard Length AlTin Coated End Mill
|
|
5/16 Dia. 2 Flute Stub Length Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
5/16 Dia. Square Corner Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
|
5/16 Dia., .020 Relieved Neck Corner Radius Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
5/16 Dia., Stub Flute, .020 Corner Rad, w/ Neck Relief
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
|
5/8 Dia. 2 Flute w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
5/8 Dia. 2 Flute w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
|
 |
|
| Shopping cart powered by MonsterCommerce e-commerce software. |