|
| Browse Catalog [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] ... |
|
5/16 Dia., .020 Relieved Neck Corner Radius Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
5/16 Dia., Stub Flute, .020 Corner Rad, w/ Neck Relief
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
|
5/8 Dia. 2 Flute w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
5/8 Dia. 2 Flute w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
|
5/8 Dia. 2 Flute X-tra Long w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
5/8 Dia., 4 Flute, Square Corner Stub Length Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
|
7/16 Dia. Square Corner w/ Weldon Shank Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
YG SOLID CARBIDE DREAM DRILL TiAlN COATED
|
|
7/32 DREAM DRILL - COOLANT THRU
YG SOLID CARBIDE DREAM DRILL TiAlN COATED
|
9/64 COBALT JOBBER GOLD-P 10 PK.
9/64 COBALT JOBBER LENGTH GOLD-P DRILL
|
|
9/64 JOBBER LENGTH GOLD-P DRILL
|
|
|
1.0 Dia, .030 Corner Rad, Stub Length 5 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 5 flute geometry reduces harmonics.
|
1.0 Dia. 3 Flute Deep Milling Streaker End Mill w/ Weldon Shank
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
|
1.0 Dia. 4 Flute .030 Corner Rad Stub Flute Long Reach Pow-R-Feed
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
1.0 Dia. 4 Flute .030 Corner Rad Stub Flute Long Reach Pow-R-Feed
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
|
1.0 Dia., .030 Corner Rad, Stub Length 3 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
1/2 Dia. 2 Flute Streaker Ball End Mill w/ Weldon Shank
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines.
|
|
1/2 Dia. 3 Flute Extra Long Streaker End Mill w/ Weldon Shank
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
1/2 Dia. Long Length Square Corner Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
|
1/2 Dia., .030 Corner Rad, Relieved Standard 5 Flute End Mill w/ Weldon Shank
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 5 flute geometry reduces harmonics.
|
1/4 Dia. , .020 Corner Rad w/ Weldon Shank 5 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 5 flute geometry reduces harmonics.
|
|
1/4 Dia. 3 Flute Streaker End Mill with Weldon Shank
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
YG SOLID CARBIDE DREAM DRILL TiAlN COATED
|
|
15/64 DREAM DRILL - COOLANT THRU
YG SOLID CARBIDE DREAM DRILL TiAlN COATED
|
2 mm Dia., Relieved Neck 2 Flute Ball End Stub
|
|
2mm Dia. Tapered Neck 2 Flute Ball End
|
2mm Dia. Tapered Neck 4 Flute Ball End (2 Flute Pictured)
|
|
3/8 Dia. 3 Flute Long Length Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
3/8 Dia. 4 Flute Ball End w/ Weldon Shank Standard Length Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
|
3/8 Dia. 4 Flute Square Corner w/ Weldon Shank Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
3/8 Dia. Stub Length .030 Corner Radius Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
|
3/8 Dia., .020 Corner Radius w/ Weldon Shank Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
3/8 Dia., .030 Corner Rad, Standard Length 3 Flute End Mill w/ Weldon Shank
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
|
3/8 Dia., Relieved Neck Square Corner w/ Weldon Shank Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
3/8 Dia., Square Corner Standard Length 3 Flute End Mill w/ Weldon Shank
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
|
3/8 Dia., Stub Flute, Square Corner w/ Neck Relief and Weldon Shank
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
5/16 Dia. .030 Corner Radius Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
|
5/16 Dia. 3 Flute Stub Length Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
5/16 Dia. Square Corner 5 Flute End Mill
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 5 flute geometry reduces harmonics.
|
|
5/16 Dia., .020 Relieved Neck Corner Radius w/ Weldon Shank Omega-6
Stronger tool core allows heavier cuts. 6 flutes for cutting power and heavy feed rates in many materials including hardened steel over 50 RC
|
5/16 Dia., Stub Flute, .020 Corner Rad, w/ Neck Relief and Weldon Shank
Increase production in Stainless Steels, and Titanium. Enhanced TiAIN-X coating offers higher heat resistance and 3 flute geometry reduces harmonics.
|
|
|
5/32 COBALT JOBBER GOLD-P 10 PK.
5/32 COBALT JOBBER LENGTH GOLD-P DRILL
|
|
5/32 JOBBER LENGTH GOLD-P DRILL
|
5/8 Dia. 3 Flute w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
|
5/8 Dia. 3 Flute w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
5/8 Dia. 3 Flute X-tra Long w/ Neck Relief Streaker End Mill
Streakers achieve maximum performance in Aluminum and Non-ferrous Metals. Streakers resist clogging are designed for aggressive chip evacuation under extremely high chip load. Effective at RPM's as low as 3,000 and reach peak performance at 10,000 RPM. Can be used on low horsepower machines. Long reach offers excellent rigidity to eliminate chatter.
|
|
5/8 Dia., 4 Flute, .030 Corner Radius Stub Length Pow-R-Feed End Mill
Offset flutes allow higher feed rates, deeper cuts with less chatter. Enhanced Ti-Al coating is 20% more heat resistant.
|
5mm Dia. 4 Flute Square Corner Standard Length AlTin Coated End Mill
|
|
 |
|
| Ecommerce powered by MonsterCommerce shopping cart. |