2L's Patented Spring Loaded Engraving Tools, the engraving and marking system for cnc milling machines, simplify engraving and marking on curved, flat and uneven surfaces.
Standard Spring Loaded Engraving Tool (3/4" Diameter)
Engraving Made Simple.
- Engrave With a CNC Milling Machine. No need for dedicated engraving machines or marking systems. Use the CNC milling equipment you already have for marking and engraving parts. Engrave using your CNC milling machine without removing the part from the machining set up or vise.
- The Standard Size Spring Loaded Engraving Tool fits in a 3/4" Collet or Endmill Holder.
- Engrave Uneven Surfaces. Spring loaded design compensates for uneven material surfaces; provides constant pressure to an engraving toolbit as it moves over the surface being engraved. Slight surface variations from part to part no longer create illegible engraving when engraving with the Spring Loaded Engraving Tool. The toolbit floats back and forth within the toolholder to move over inconsistencies in the part. It is not critical that the part being engraved is perfectly flat on the machine table.
- Provides .40" of Travel to the Toolbit. Compensates for changing tolerances in the material surface.
- Dramatically Reduce Cycle Times by 84%. Rapid tool (G0) into the part instead of slow Spring Loaded Engraving Tool significantly reduces engraving cycle time.
- Designed for high volume - high speed production engraving.
- Engraving 2L Software - Full Version. The Full Version of the 2L Engraving Software is included in your purchase of a Spring Loaded Engraving Tool Kit.
* The Spring Loaded Engraving Tool is covered by U.S. Patents 6,834,434, 7,093,368 and a pending utility patent application.
